TAURUS G3 9MM BUDS GUN MANUAL
TAURUS G3 9MM BUDS GUN VERIFICATION

The G3 also can be fired with the magazine removed. It’s a great capability for a self-defense gun. As anyone who has done a fair amount of shooting knows, sometimes with a repeat strike, the round goes off. That means if a round fails to go off the first time, after reset, the trigger can be squeezed again quickly. Relating to the trigger system, unlike other striker-fired pistols, the G3 has repeat-strike capability. The grip also has thumbrests on both sides of the grip. Texturing is applied to the polymer grip in six panels on the polymer grip frame: one on the frontstrap, one on the backstrap, and two on each side. The reset was not the shortest I’ve experienced, but it wasn’t the longest, either, and it was audible. Take-up was long, but the break was crisp. My sample’s trigger broke at 6.0 pounds on average for five measurements with my RCBS trigger pull scale. A lot of striker-fired pistols have sloppy, heavy trigger pulls. A striker-fired mechanism usually requires stiffer springs for reliable operation, and as a rule that makes the slide more difficult to rack.Īlso unlike a lot of other striker-fired guns, the G3’s trigger pull is pretty good. One surprising-and pleasant-characteristic of the G3 is that unlike other striker-fired pistols, its slide is easy to rack. After first shooting the new pistol at a Taurus-sponsored media event held at Southwind Plantation in Georgia last April and working with a second pistol months later on my home range, I can attest to that fact. That means the G3 is easy and comfortable to shoot.

A lower bore axis permits the pistol to sit lower in the shooter’s hand, which translates into better control of muzzle flip. Like many other striker-fired pistols, the G3 has a low bore axis. Ten-round magazines are available where mandated by law. Our sample G3 came with one 15-round magazine and one 17-round magazine. The company calls them “Taurus Memory Pads,” and the term has been trademarked.

TAURUS G3 9MM BUDS GUN VERIFICATION

When a round is chambered, the cartridge case can be viewed through the top of the barrel’s chamber, providing visible verification that a cartridge is loaded in the chamber.įinally, the G3’s polymer frame has recesses on both sides above the trigger guard that are designed specifically for the shooter to use to rest the trigger finger on when not actively shooting, keeping the trigger finger entirely outside the trigger guard and off the trigger. The frame has “Taurus Memory Pads” above the trigger guard on both sides for safe positioning of the trigger finger.Īnother safety feature of the G3 is the loaded-chamber view port. The G3 has a standard non-ambidextrous thumb safety located on the left side of the pistol. Levering it down allows the pistol to be fired. Moving it up engages the safety and prevents the trigger from being squeezed all the way as well as preventing the slide from moving rearward. It is not ambidextrous, but it is positioned for easy access with the thumb of the shooter’s right hand.

TAURUS G3 9MM BUDS GUN MANUAL

Yet another safety system is the manual thumb safety located on the left side on the slide. I much prefer the wider trigger safety lever of the G3. The unique thing about the G3’s trigger safety is that it is noticeably wider than other such trigger safeties. Like other similar trigger safeties, the G3’s is designed to prevent the trigger from being squeezed unless the shooter’s finger has fully engaged and depressed the trigger safety. The sample pistol had a good trigger pull, averaging 6.0 pounds over five measurements with an RCBS trigger scale. The G3’s trigger safety is similar to others of this style, except the lever is much wider than most. But first I want to point out the safety features Taurus has built into this pistol. The new striker-fired G3 pistol has all the features most handgunners demand in this type of gun, and I’ll get to a detailed description of those features in a moment. Plus, they perform as well or better than a lot of similar-size pistols that cost twice as much. They were introduced in 2013 and upgraded in 2018 and have earned a good reputation for being easy to carry and easy to shoot. For anyone who doesn’t know, the G2 and G2c guns are compact pistols. The new G3 is a full-frame semiautomatic pistol, and as such, it takes the popular Taurus G2 to the next level. It’s the next generation of Taurus G-series pistols. With a matte-black steel slide, three-dot sights, a polymerframe, a 4.0-inch barrel, and a trigger safety, Taurus’s new G3 9mm semiautomatic pistol might not sound like anything new, but it is.

Taurus g3 9mm buds gun